www.csy-tech.com
| 型號 | Model | WELDING-010 | - |
|---|---|---|---|
| 入力電壓 | Rated Input Voltage / Input Voltage | 220V±10% 50/60Hz | - |
| - | Rated Frequency | 50/60Hz | - |
| 入力相數 | Number of Phases | 單相 | Single Phase / Three Phase |
| 定格入力(kVA) | Rated Input Power | - | - |
| 定格使用率 | Rated Duty Cycle | 100% | - |
| 初期電流範圍 | Initial Current | 0.2-35A | - |
| 熔接電流範圍 | Welding Current | 0.2-35A | - |
| 脈波電流範圍 | Pluse Current | 0.2-35A | - |
| 收尾電流範圍 | Crater Current | 0.2-35A | - |
| 無負載電壓 | Without Load Voltage | 110V | - |
| 最大負載電壓 | Max Load Voltage | 40V | - |
| 電流緩升時間 | Up-Slope Time | 0.1~5sec | - |
| 電流緩降時間 | Down-Slope Time | 0.2~10sec | - |
| TIG 點焊時間 | TIG Spot Time | 0.2~5sec | - |
| 氬氣前吹時間 | Pre-flow Time | 0.1~2sec | - |
| 氬氣後吹時間 | Post-flow Time | 2~20sec | - |
| 脈波週波數 | Pulse Frequency | 0.5~500Hz | - |
| 脈波幅 | Pulse Rate | 20-80% | - |
| 電流制御 | Crater Control | 點焊、有、無、反復 | Spot/Off/On/Repeat |
| 電流線控 | Current Remote Control | Optional | Available |
| 焊槍冷卻方式 | Torch Cooled | 水冷 | Cooline type : Water cooling |
| 尺寸(長×寬×高) | Dimensions / Size | - | - |
| 重量 | Weight / Mass | - | - |
| 焊接機 | M350 Welbee Inverter | - | - |
| 溶接電源 | Cutting Power Source | WB-M350 | - |
| 入力電源 | Phase / Rated Input Voltage | 3Ø 200/220V 50/60Hz | Three-phase |
| 額定入力 | Rated Input Power (Freeze Into Force) | 16.3kVA (14.7kW) | - |
| 額定輸出電流 | Rated Output Current | 350A | - |
| 額定負荷電壓 | Rated Load Voltage | 36V | - |
| 出力調整範圍 | Rated Output Range | 30~350A/12~36V | - |
| 出力電流範圍 | Output Current Range | 30~350A | - |
| 出力電壓範圍 | Output Voltage Range | 12~36V | - |
| 無負荷電壓 | No-Load Voltage | 70V/77V | - |
| 額定使用率 | Rated Duty Cycle | 60% | STICK 電焊 |
| 電離子切割機 | Plasma Cutting Machines | - | - |